FS - V1 Series
Model |
FS-V1 |
|||
Type |
Main unit |
|||
Light source |
Red LED |
|||
Response time |
250 μs |
|||
Operation mode |
LIGHT-ON/DARK-ON (switch-selectable) |
|||
Display indicator |
Display indicator (Two): Red LED |
|||
Timer function |
ON-delay: 40 ms/OFF-delay: |
|||
Control |
NPN open-collector 100 mA max. (24 VDC max.), Residual voltage: 1 V max. The FS-V1P is equipped with two outputs. |
|||
Protection circuit |
Reversed polarity protection, over-current protection, surge absorber |
|||
No. of expansion units *1 |
Up to 16 expansion units can be connected (a total of 17 units). |
|||
Mutual interference |
FINE : 4, TURBO/SUPER: 8 |
|||
Power supply |
12 to 24 VDC (±10%), ripple (p-p): 10% max.,Class 2*2 |
|||
Current consumption |
50 mA max. |
|||
Ambient illumination |
Incandescent lamp: 10000 lux max., Sunlight: 20000 lux max. |
|||
Ambient temperature |
-10 to +55°C (14 to 131°F), No condensation |
|||
Relative humidity |
35 to 85%, No condensation |
|||
Vibration resistance |
10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours each in the X, Y and Z axis |
|||
Shock resistance |
500 m/s2 in X, Y, and Z directions, 3 times respectively |
|||
Housing |
Polycarbonate |
|||
Weight |
Approx. 80 g |
|||
*1 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. |
Model |
FS-T1 |
|||
Type |
Main unit |
|||
Light source |
Red LED |
|||
Sensitivity adjustment/Mode selection |
Button |
|||
Response time |
250 μs |
|||
Operation mode |
LIGHT-ON/DARK-ON (switch-selectable) |
|||
Display indicator |
Output indicator: Red LED, Stable operation indicator: Green LED |
|||
Timer function |
ON-delay: 40 ms/ OFF-delay: 40 ms/ Timer OFF (switch-selectable) |
|||
External calibration input signal |
Non-voltage input (contact, solid state) |
|||
Control output |
NPN open-collector 100 mA max. (40 VDC max.), Residual voltage: 1 V max. |
|||
Stability output |
NPN open-collector 50 mA max. (40 VDC max.), Residual voltage: 1 V max. *2 |
|||
Protection circuit |
Reversed polarity protection, over-current protection,surge absorber |
|||
No. of expansion units*1 |
Up to 16 expansion units can be connected (a total of 17 units) |
|||
Mutual interference suppression |
4 |
|||
Power supply |
12 to 24 VDC (±10%), ripple (p-p): 10% max. |
|||
Current consumption |
35 mA max. |
|||
Ambient illumination |
Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max. |
|||
Ambient temperature |
-10 to +55°C (14 to 131°F), No condensation |
|||
Relative humidity |
35 to 85%, No condensation |
|||
Vibration resistance |
10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours each in the X, Y and Z axis |
|||
Shock resistance |
500 m/s2 in X, Y, and Z directions, 3 times respectively |
|||
Housing |
Polycarbonate |
|||
Weight (including 2-m 6.6' cable) |
Approx. 75 g |
|||
*1 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. |
Model |
FS-M1 |
|||
Type |
Main unit |
|||
Light source |
Red LED |
|||
Sensitivity adjustment/Mode selection |
8-turn trimmer (with indicator), FINE/TURBO (switch-selectable) |
|||
Response time |
250 μs (FINE)/500 μs (TURBO) |
|||
Operation mode |
LIGHT-ON/DARK-ON (switch-selectable) |
|||
Display indicator |
Output indicator: Red LED, |
|||
Timer function |
ON-delay: 40 ms/ OFF-delay: 40 ms/ Timer OFF (switch-selectable) |
|||
External calibration input signal |
- |
|||
Control output |
NPN open-collector 100 mA max. (40 VDC max.), Residual voltage: 1 V max. |
|||
Stability output |
NPN open-collector 50 mA max. (40 VDC max.), Residual voltage: 1 V max. *2 |
|||
Protection circuit |
Reversed polarity protection, over-current protection,surge absorber |
|||
No. of expansion units*1 |
Up to 16 expansion units can be connected (a total of 17 units) |
|||
Mutual interference suppression |
FINE : 4, TURBO/SUPER: 8 |
|||
Power supply |
12 to 24 VDC (±10%), ripple (p-p): 10% max. |
|||
Current consumption |
35 mA max. |
|||
Ambient illumination |
Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max. |
|||
Ambient temperature |
-10 to +55°C (14 to 131°F), No condensation |
|||
Relative humidity |
35 to 85%, No condensation |
|||
Vibration resistance |
10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours each in the X, Y and Z axis |
|||
Shock resistance |
500 m/s2 in X, Y, and Z directions, 3 times respectively |
|||
Housing |
Polycarbonate |
|||
Weight (including 2-m 6.6' cable) |
Approx. 75 g |
|||
*1 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. |
This website uses cookies (Learn more) and has a privacy policy (Learn more).