Model |
TM-006 |
TM-040 |
TM-065 |
|||
Measuring range |
ø6 mm ø0.24" |
ø40 mm ø1.57" |
ø65 mm ø2.56" |
|||
Smallest detectable object |
0.04 mm 0.001" |
0.3 mm 0.01" |
0.5 mm 0.02" |
|||
Transmitter/receiver distance |
60 mm 2.36" |
180 mm 7.09" |
270 mm 10.63" |
|||
Light source |
GaN Green LED |
InGaN Green LED |
||||
Measurement accuracy |
±0.5 μm 0.02 Mil *3 |
±2 μm 0.08 Mil *5 |
±3 μm 0.12 Mil*7 |
|||
Repeatability |
±0.06 μm 0.002 Mil*4 |
±0.15 μm 0.05 Mil *6 |
±0.2 μm 0.007 Mil *8 |
|||
Sampling cycle (trigger interval) *1 |
5.5ms (33ms at the initial setting) |
|||||
Environmental |
Enclosure rating *2 |
IP64 |
||||
Ambient temperature |
0 to 50°C 32 to 122°F |
|||||
Relative humidity |
35 to 85% (No condensation) |
|||||
Material |
Aluminum |
|||||
Weight |
Transmitter |
Approx. 140g |
Approx. 560g |
Approx. 1280g |
||
Receiver |
Approx. 340g |
Approx. 720g |
Approx. 1460g |
|||
Base |
Approx. 220g |
Approx. 630g |
Approx. 1500g |
|||
*1 When measurement area is minimum, others are initial settings |
Model |
TM-3001 |
TM-3001P |
|||
Sensor head compatibility |
Compatible |
||||
Number of connectable sensors *1 |
2 units max. |
||||
Display |
Minimum display unit |
0.01 μm, 0.001 mm2, 0.01° |
|||
Maximum display range |
±9999.99 mm, ±99999.9 mm2, ±99999.9° |
||||
Input |
Laser remote interlock input |
Non-voltage input |
|||
Trigger input (for Head A) |
Non-voltage input |
Voltage input |
|||
Timing 1 input |
|||||
Auto-zero 1 input |
|||||
Reset input |
|||||
Output |
Analog voltage output |
±10 V x 2 outputs, out put impedance: 100 Ω |
|||
Total judgment output |
NPN open-collector output |
PNP open-collector output |
|||
Error output |
NPN open-collector output (N.C.) |
PNP open-collector output (N.C.) |
|||
Process output |
NPN open-collector output |
PNP open-collector output |
|||
Trigger input enable output |
|||||
Adjusted error output |
|||||
Expansion |
Trigger input (for Head A) |
Non-voltage input |
Voltage input |
||
Timing 2 input |
|||||
Auto-zero 2 input |
|||||
Program switching input |
Non-voltage input, 4 inputs |
Voltage input, 4 inputs |
|||
Memory card save input |
Non-voltage input |
Voltage input |
|||
Judgment/Binary output*3 |
3-level judgment output: OUT1 to OUT16, total judgment output |
3-level judgment output: OUT1 to OUT16, total judgment output |
|||
Strobe output |
NPN open-collector output |
PNP open-collector output |
|||
Trigger input enable output |
|||||
Analog RGB monitor output |
SVGA (800 x 600 pixels) |
||||
RS-232C interface |
Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable) |
||||
USB interface |
In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible) |
||||
Ethernet interface |
1000BASE-T/1000 BASE-TX/10 BASE-T |
||||
Memory card |
SD card CA-SD4G (4GB), CA-SD1G (1GB) support |
||||
Ratings |
Power supply voltage |
24 VDC ±10%, Ripple: 10% (P to P) or less |
|||
Current consumption |
1 head connected 480mA max./ 2 heads connected 550mA max. |
||||
Environmental |
Ambient temperature |
0 to 50°C 32 to 122°F |
|||
Relative humidity |
35 to 85% (No condensation) |
||||
Material |
Polycarbonate |
||||
Weight |
Approx. 1120g |
||||
*1 1 or 2 units can be connected only with the same head model |
This website uses cookies (Learn more) and has a privacy policy (Learn more).