เหลือ 99 ชิ้น
  • หมวดหมู่ : Power Analyzers/Quality
  • รหัสสินค้า : 012475

รายละเอียดสินค้า FLUKE-N5K 6PP64I

Norma High Precision Power Analyzers

  • Compact, high precision power analyzers – easy to carry and save working space
  • Simple user interface ensures easy, intuitive operation
  • Standard configurations allow users to specify the exact functionality required for their own unique application
  • Accurately display dynamic events on all phases at exactly the same point in time with simultaneous parallel acquisition of all phases
  • All inputs are galvanically isolated to avoid short circuits in all applications.Voltage, current and power harmonics up to the 40th
  • FFT analysis, vector diagram display, recorder function and Digital Oscilloscope (DSO) mode included
  • User-selectable average time – from 15 ms up to 3600 s – for dynamic measurements
  • 4 MB on-board memory for storage of measured values
  • RS232 and USB available as standard; optional IEEE 488/Ethernet available
  • Optional process interface available to measure torque and speed with external sensors; includes four analog outputs for easy use on motor and drive applications
  • 341 kHz or 1 MHz sample rates for detailed signal analysis
  • Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision
  • Includes Fluke NormaView PC software for setup, data download, analysis & report writing


  Norma 4000 Norma 5000
Number of Phases 1 or 3 3, 4, or 6
Bandwidth DC to 3 MHz or dc to 10 MHz depending on input module
Basic Accuracy 0.2%, 0.1% or 0.03% depending on input modules
Sampling Rate 0.33 MHz or 1 MHz depending on input modules
Voltage Input Range 0.3 to 1000 V
Current Input Range 
(direct, not via shunt)
0.03 mA – 20 A depending on input module
Display Color, 5.7" / 144 mm - 320 x 240 pixel
Fast Fourier Transformation
To the 40th harmonic
RS232 Interface Standard
PI1 Process Interface 
(8 analog / impulse 
inputs & 4 analog outputs)
IEEE 488/GPIB Interface Optional
Fluke NormaView PC Software 
(for data download, 
analysis & report writing)
Basic Function
Included functions
  • Fast Fourier Transformation (FFT)
  • Digital Oscilloscope (DSO)
  • Integration function (energy)
  • Vector Display
  • Recorder
  • RAM data memory
  • Configuration
More information on the Basic Function of the Norma Series >>
Working Temperature Range

Non-gapping calculation of averaged values for each phase. In three phase system additionally calculation of total power and averaging of V and I of the three phases. The fundamental H01 will be calculated in synchronous mode also for these values.

Urms effective value, Urm rectified mean, Um mean value 
Up-, Up+, Upp peak values 
Ucf crest factor Ucf, Uff form factor 
Ufc fundamental content 
Uthd distortion factor DIN, IEC 
Irms effective value, Irm rectified mean, Im mean value 
Ip-, Ip+, Ipp peak values 
Icf crest factor Icf, Iff form factor 
Ifc fundamental content 
Ithd distortion factor DIN, IEC 
P active power [W] 
Q reactive power [Var] 
S apparent power [VA] 
ë, cos. phase angular
Integral function for active power P, reactive power Q, apparent power S, voltage (Um) and current (Im)
Number of digits 4 or 5 dependent on measured value.
Frequency and Synchronization
Range DC and 0.2 Hz to sample rate
Accuracy ±0.01 % of measured value (reading)
General Specifications
  • Channels which can be selected: all U/I or external input.
  • One of three low pass filter with different frequencies can be switched into the signal.
  • The frequency is always visible on the top of the screen.
  • The BNC synchronization socket on backside of the instrument can be used either as input or output.
  • The input signals can be measured up to the sample rate of the power phase. The maximum level must not be higher then 50V.
  • The output signal is a pulsed 5Volts TTL signal (frequency depends on the measured synch frequency).
Power Phase Channels
Range PP42 PP50 PP54 PP64
Accuracy 0.2% (0.1% rd + 0.1% rg) 0.1% (0.05% rd + 0.05% rg) 0.1% (0.05% rd + 0.05% rg) 0.03% (0.02% rg + 0.01% rg)
Current range 20A 10A 10A 10A
Sampling rate 341 kHz 1 MHz 341 kHz 341 kHz
Bandwidth 3 MHz 10 MHz 3 MHz 3 MHz
More info More on PP42>> More on PP50>> More on PP54>> More on PP64>>
Configuration Memory
Memory for Configurations 4 MB
Up to 15 user configurations can be saved into a permanent memory and reloaded later on. Changes that were not saved are lost after switching off the instrument.
Memory for Settings Standard
Ambient Conditions
Working Temperature Range 5°C to 35°C (41°F to 95°F)
Storage Temperature Range -20°C to 50°C (-4°F to 122°F)
Housing Material Fluke Norma Power Analyzers are extremely compact and equipped with a solid metal case to meet stringent EMC requirements.
Climatic Class KYG DIN 40040, max. 85 % relative humidity, non-condensing.
Power supply 85 V ac to 264 V ac, 50 Hz to 60 Hz, dc 100 to 260 V, ca. 40 VA European plug with switch. Binding post for current available on some models.
Measuring Inputs Safety sockets 4 mm, 2 for each input. External shunt connection over BNC socket.
Operation Membrane keyboard with cursor – function keys and direct functions.
Connections Rear panel of the 3-phase Analyzer
Standards and Safety
Electrical Safety EN 61010-1 / 2nd Edition 1000 V CAT II (600V CAT III)
Degree of pollution 2, safety Class I 
EN 61558 for transformer 
EN 61010-2-031/032 for accessories
Maximum inputs For voltage inputs Measurement range 1000 Veff, 2 kVpeak
For current inputs Measurement range 10 Aeff, 20 Apeak
Test voltage
Net input case
(protective conductor)
1.5 KV AC
Net connection Measurement input 5.4 kV AC
Measurement inputs Case 3.3 kV AC
Measurement input input 5.4 kV
Electromagnetic susceptibility
Emission IEC 61326-1, EN 50081-1, EN 55011 Class B
Immunity IEC 61326-1 / Annex A (industrial sector), EN 50082-1
Physical Dimensions
Norma 4000 5.9 in x 9.3 in x 12.4 in (150 mm x 237 mm x 315 mm)
Norma 5000 5.9 in x 17.6 in x 12.4 in (150 mm x 447 mm x 315 mm)
Norma 4000 Approx. 11 lb. (5 kg)
Norma 5000 Approx. 15 lb. (7 kg)