Model |
RC2-21 |
|||
Operation method |
Addition, subtraction, addition and subtraction |
|||
Operation mode |
Overcount, auto reset, rotary, range distinction |
|||
Return method |
Manual reset, external reset, automatic reset |
|||
Display power |
7-segment LED (character height: 14 mm) |
|||
The number of digits*1 |
5-digit display (zero suppression method), -9,999 to 99,999 |
|||
Prescale function |
A |
1 to 99 is counted per pulse input |
||
B |
1 is counted per 1 to 99,999 pulse inputs |
|||
Power off memory time |
Approx. 10 years (at 20°C) |
|||
Mounting method |
Panel mount (embedding) |
|||
Highest counting speed |
With contacts: 50 Hz, without contacts: 500 Hz, 5 kHz, 50 kHz (switchable; 1:1 ON:OFF ratio) |
|||
External calibration input signal |
System |
Separate, instruction, phase difference |
||
Signal |
No-voltage input (with contacts, without contacts [count input, reset input, inhibit input, external switching input]) |
|||
Input signal |
- |
|||
Control output |
Relay output: 1c, 250 VAC, 2 A (125 VA or less); maximum NPN open-collector output: 100 mA (40 V or less); residual voltage: 1 V or less; hold/one-shot (switchable) |
|||
Control output |
One-shot output time |
Can be set to an arbitrary value between 0.01 and 9.99 seconds (in units of 0.01 seconds) |
||
Relay |
Relay output: 13 ms (when set to 50 Hz), 4 ms (when set to 500 Hz), 4 ms (when set to 5 kHz), 4 ms (when set to 50 kHz) |
|||
DC output |
12 VDC ± 10%, 100 mA maximum |
|||
Rating |
Power voltage |
100 to 240 VAC ± 10%, 50/60 Hz |
||
Power consumption |
12VA or less |
|||
Noise resistance |
Square wave noise generated by a noise simulator, between the power supply terminals, 1 kV for 1 μs |
|||
Withstand voltage |
500 VAC for 1 minute (between all the external terminals and the case) |
|||
Insulation resistance |
100 MΩ or more (tested with a 500 VDC megger) between all the AC external terminals and the case |
|||
Environmentalresistance |
Vibration resistance |
10 to 55 Hz, 0.75 mm double amplitude for 2 hours in each of the X, Y, and Z directions |
||
Operating ambient temperature |
0 to +50°C |
|||
Operating ambient humidity |
35 to 85%RH(no condensation) |
|||
Shock resistance |
100 m/s2, 3 times in each of the X, Y, and Z directions |
|||
Weight |
approx 320g |
|||
*1 Display uses the zero suppression method. |
This website uses cookies (Learn more) and has a privacy policy (Learn more).