บริษัท ทริปเปิ้ล อี เทรดดิ้ง จำกัด

Fluke 718 100G Pressure Calibrator

฿152490.00

Includes:
Fluke 718 100G Pressure Calibrator;
Protective Yellow Holster with test lead storage;

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

รายละเอียดสินค้า Fluke 718 100G Pressure Calibrator

Specifications

Technical Specifications

Standard

718 Series
Measure Pressure	(internal sensor)
Accuracy	0.05% full scale
Functions	zero, min/max, hold, damp
Note:	Dry air, non-corrosives only

718 1G
Range:	-1 PSI to +1 PSI, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)
Resolution:	0.0001 psi, 0.001 mbar, 0.0001 kPa
Over Pressure:	5x Full Scale
Functions:	Zero, Min, Max, Hold, Damp

718 30G
Range:	-12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa)
Resolution:	0.001 psi, 0.1 mbar, 0.01 kPa
Over Pressure:	5x Full Scale
Functions:	Zero, Min, Max, Hold, Damp

718 100G
Range:	-12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa)
Resolution:	0.01 psi, 0.1 mbar, 0.01 kPa
Over Pressure:	2x Full Scale
Functions:	Zero, Min, Max, Hold, Damp

718 300G
Range:	-12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa )
Resolution:	0.01 psi, 1 mbar, 0.1 kPa
Over Pressure:	375 PSI 25 bar
Functions:	Zero, Min, Max, Hold, Damp

Fluke 718 series via using 700 Series Pressure Modules

Range:	29 pressure modules, 0 – 1 in H20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs
Resolution:	Per pressure module specs
Accuracy:	To 0.025 % of full span, per pressure module specs
Functions:	Zero, Min, Max, Hold, Damp
	Note: media compatibility per pressure module specs

Fluke 718 series via built in pump

Range:	-12 PSI or -850 mbar to full scale Supported Pressure Units; psi, in H20 (4 °C), in H20 (20 °C), cm H20 (4 °C), cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm
Loop Power:	Range: 24 V dc Accuracy: +/- 10 % Note: Drive; 20 mA into 1000 Ω for battery > 6.8V; 700 Ω for battery 5.8 to 6.8 V
mA Measure:	Range: 0 mA to 24 mA Resolution: 0.001 mA Accuracy: 0.015 % + 1 count

General Specifications
Maximum voltage	30 volts: Non-operating
Temperature	-40 °C to 60 °C
Operating Temperature	-10 °C to 55° C
Relative Humidity	95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C)
Operating Altitude	3,000 M max
Shock	1 M drop test
Vibration	Random, 2 g, 5 Hz – 500 Hz
Safety	CSA C22.2 No. 1010.1: 1992
EMC	EN50082-1: 1992 and EN55022: 1994 Class B
Size	216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in)
Weight	992 g (35 oz)
Power, battery life	9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
Battery Life	4 to 20 hours typical, depending on functions used
Warranty	Three years (one year on pressure pump in Fluke 718)
Display	LCD, 5 digit pressure and current simultaneous
Note	For use with non-corrosive gasses