บริษัท ทริปเปิ้ล อี เทรดดิ้ง จำกัด

H3CA-A OMRON

฿1440.00

H3CA-A OMRON

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : Timers
รหัสสินค้า : 007101

รายละเอียดสินค้า H3CA-A OMRON

**Ratings**
Rated supply voltage	24 to 240 VAC 50/60 Hz 12 to 240 VDC Permissible ripple: 20% max.
Operating voltage range	90% to 110% of rated supply voltage(21.6 to 264 VAC/10.8 to 264 VDC)
Power consumption	Approx. 0.2 to 4 VA Approx. 0.2 to 2 W Note: Inrush current will flow for a short time when the power supply is turned ON. Inrush Current (Reference Values) 1.6 A (peak value) (Applied voltage: 264 VAC, Time: 0.6 ms)
Time ranges (Number of ranges)	7
Time ranges	0.1 s to 99.9 s, 1 s to 999 s, 0.1 min to 99.9 min, 1 min to 999 min, 0.1 h to 99.9 h, 1 h to 999 h, 10 h to 9990 h
Select method	Thumbwheel Switch
Input signals	Start, Reset, Gate, Check
Input method	No-voltage input
Minimum input signal width	0.05 s (Reset, Gate)
Output modes	A (ON delay), B (Repeat cycle), C (Signal ON/OFF delay), D (Signal OFF delay), E (Interval), F (One shot flicker), G (Signal ON/OFF delay), H (Signal OFF delay)
Control output (Contact output)	Type: Time-limit contact: SPDT Switching capacities (Resistive load): 3 A at 250 VAC Switching capacities (Inductive load): 1 A 250 VAC (cos phi=0.4) / 2.5 A 24 VDC ( L/R=7 ms) Minimum applicable load: 100 mA at 5 VDC (failure level: P)
Reset system	Self-reset/External reset
Power reset	Reset time: 0.5 s max.
Display method	LCD
Ambient temperature	Operating: -10 to 55 CEL (with no icing or condensation) Storage: -25 to 65 CEL (with no icing or condensation)
Ambient humidity	Operating: 35 to 85% RH Storage: 35 to 85% RH

**Characteristics**
Accuracy of operating time	+/- 0.3% +/- 0.05 s (The values are based on the set value.)
Setting error	+/- 0.5% +/- 0.05 s (The values are based on the set value.)
Influence of voltage	+/- 0.3% +/- 0.05 s (The values are based on the set value.)
Influence of temperature	+/- 0.3% +/- 0.05 s (The values are based on the set value.)
Insulation resistance	100 MOhm min. (at 500 VDC) between current-carrying terminals and exposed non-curernt-carrying metal parts, between control output terminals and operating circuit, between non-continuous contacts
Dielectric strength	between current-carrying metal parts and non-curernt-carrying metal parts: 2000 VAC 50/60 Hz for 1 min between control output terminals and operating circuit: 2000 VAC 50/60 Hz for 1 min between non-continuous contacts: 1000 VAC 50/60 Hz for 1 min
Impulse withstand voltage	between power terminals: 3 kV between current-carrying metal parts and exposed non-curernt-carrying metal parts: 4.5 kV
Noise immunity	Between power terminals: +/- 2 kV Between input terminals: +/- 600 V Square-wave noise by noise simulator (Pulse width: 100 ns/1 us, Rise: 1-ns)
Vibration resistance (Destruction)	10 to 55 Hz, 0.75 mm single amplitude in each 3 directions for 1 hour
Vibration resistance (Malfunction)	10 to 55 Hz 0.5 mm single amplitude in each 3 directions for 10 min
Shock resistance (Destruction)	1000 m/s**2, in each 6 directions (3 axes) 3 times
Shock resistance (Malfunction)	100 m/s**2, in each 6 directions (3 axes) 3 times
Mechanical Life expectancy (relay output)	10000000 operations min. (under no load at 1800 operations/h)
Electrical Life expectancy (relay output)	100000 operations min. (3 A at 250 VAC resistive load at 1800 operations/h)
Degree of protection	IEC60529(JEM): Panel surface: IP40
Applicable standard (UL)	Standard No.: UL508 File number: E41515
Applicable standard (CSA)	Standard No.: CSA C22.2 No.14 File number: LR22310
Applicable standard (LR)	Approved
Applicable standard (NK)	A-441-1A
Applicable standard (EC Directive (EMC Directive) )	EMI: EN61812-1 Emission Enclosure: EN55011 Group 1 class A Emission AC mains: EN55011 Group 1 class A EMS: EN61812-1 Immunity ESD: EN61000-4-2 (6 kV contact discharge (level 2), 8 kV air discharge (level 3)) RF-interference: EN61000-4-3 (10 V/m (Amplitude-modulated, 80 MHz to 1 GHz) (level 3), 10 V/m (Pulse-modulated, 900 MHz 5 MHz) (level 3)) Immunity Burst: EN61000-4-4 (2 kV power-line (level 3), 1 kV I/O signal-line (level 4)) Immunity Surge: EN61000-4-5 (1 kV line to lines (power and output lines) (level 3), 2 kV line to ground (power and output lines) (level 3))
Mounting method	Flush mounting / Surface mounting
external connection method	11-pin round socket
Case color	Light gray (Munsell 5Y7/1)
Accessory (sold separately)	Soft Cover (Y92A-48D) Hard Cover (Y92A-48B) Flush Mounting Adapter (Y92F-30) Flush Mounting Adapter (Y92F-70) Flush Mounting Adapter (Y92F-71)
Weight	Approx. 110 g