| Product outline | Digital Fiber Sensor, 2-channel models, Connector models |
|---|---|
| Sensing distance(Typical) |
E32-TC200: 0 to 500 mm (Standard mode) E32-DC200: 0 to 210 mm (Standard mode) |
| Light source | Red LED |
| Emission wave length | 635 nm |
| Power supply voltage | 12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.) |
| Current consumption | 45 mA Max. |
| Power consumption | 1080 mW Max. |
| Operation mode | Light-ON/Dark-ON selectable |
| Control output (Output type) | NPN open collector output |
| Control output (Load current) | 0 to 50 mA |
| Control output (Residual voltage) | (DC) 1 V Max. (load current:50mA Max.) |
| Protective circuit |
Surge suppressor Output short-cut protection Power supply reverse polarity protection |
| Response time |
Standard mode: Operate 1 ms Max., Reset 1 ms Max. High-resolution mode: Operate 4 ms Max., Reset 4 ms Max. High-speed mode: Operate 450 us Max., Reset 450 us Max. Super-high-speed mode (NPN): Operate 130 us Max., Reset 130 us Max. (When selected output is AND, OR, leading edge sync, falling edge sync, and differential output settings, The second channel output is 200 us for operation and reset respectively.) |
| Mutual interference prevention | 9 Units(When power tuning is enabled: 5 Units) |
| Sensitivity setting | Teaching or manual method |
| Function |
Zero reset Initial reset Power tuning Auto power control Timer function Channel 2 output Response speed selectable |
| Ambient illuminance | Incandescent lamp:10000 lux Max. Sunlight:20000 lux Max. |
| Ambient temperature (Operating) |
Groups of 1 to 2 Sensors:-25 to 55 CEL Groups of 3 to 10 Sensors:-25 to 50 CEL Groups of 11 to 16 Sensors:-25 to 45 CEL (with no icing or condensation) |
| Ambient temperature (Storage) |
-30 to 70 CEL (with no icing or condensation) |
| Ambient humidity |
Operating: 35 to 85 %RH Storage: 35 to 85 %RH (with no icing) |
| Insulation resistance | 20 M OHM Min. at 500 VDC between charged parts and the case |
| Dielectric strength | 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
| Vibration resistance | 10 to 55 Hz1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 500m/s2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP50 |
| Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-5-2 |
| Applicable standard (EC Directive (EMC Directive)) |
EMI: EN60947-5-2 Emission Enclosure: EN55011 Group 1 classA EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Conducted Disturbance: IEC61000-4-6 Immunity Burst: IEC61000-4-4 |
| Connection method | Connector models |
| Indicator | Operation indicator (Orange), Digital display |
| Weight (packed state) | Approx. 100 g |
| Material (case) | PBT |
| Material (cover) | Polycarbonate |
| Mounting | DIN rail or the mounting bracket type E39-L143 (sold separately) |
| Applicable connector | E3X-CN21, E3X-CN22 |
| Accessories |
Instruction manual |


This website uses cookies (Learn more) and has a privacy policy (Learn more).


