บริษัท ทริปเปิ้ล อี เทรดดิ้ง จำกัด

E3X-DAC11-S OMRON

฿5800.00

E3X-DAC11-S OMRON

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : PHOTOELECTRIC SENSORS
รหัสสินค้า : 007204

รายละเอียดสินค้า E3X-DAC11-S OMRON

Product outline	Color sensing type Digital Fiber Sensor, Standard models
Sensing distance(Typical)	E32-TC200: 0 to 32 mm (Standard mode (Translucent object)) E32-DC200: 0 to 10 mm (Standard mode (Standard card of 11 color))
Light source	White LED
Emission wave length	420 to 700 nm
Power supply voltage	12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.)
Current consumption	40 mA Max. (at 24V)
Power consumption	960 mW Max.
Operation mode	Conformity output ON/Nonconformity output ON selectable
Control output (Output type)	NPN open collector output
Control output (Load current)	0 to 50 mA
Control output (Residual voltage)	(DC) 2 V Max. (load current:50mA Max.)
Protective circuit	Surge suppressor Output short-cut protection Output reverse polarity protection Power supply reverse polarity protection
Response time	Standard mode: Operate 1 ms Max., Reset 1 ms Max. High-resolution mode: Operate 4 ms Max., Reset 4 ms Max. High-speed mode: Operate 300 us Max., Reset 300 us Max. Super-high-speed mode (NPN): Operate 60 us Max., Reset 60 us Max.
Mutual interference prevention	10 Units(When the detection mode is selected during super-high-speed mode: Not function)
Sensitivity setting	Teaching or manual method
Function	Zero reset Initial reset Timer function Key lock User reset
Ambient illuminance	Incandescent lamp:3000 lux Max. Sunlight:10000 lux Max.
Ambient temperature (Operating)	Groups of 1 to 2 Sensors:-25 to 55 CEL Groups of 3 to 10 Sensors:-25 to 50 CEL Groups of 11 to 16 Sensors:-25 to 45 CEL (with no icing or condensation)
Ambient temperature (Storage)	-30 to 70 CEL (with no icing or condensation)
Ambient humidity	Operating: 35 to 85 %RH Storage: 35 to 85 %RH (with no icing)
Insulation resistance	20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP50
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-5-2
Applicable standard (EC Directive (EMC Directive))	EMI: EN60947-5-2 Emission Enclosure: EN55011 Group 1 classA EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Conducted Disturbance: IEC61000-4-6 Immunity Burst: IEC61000-4-4
Connection method	Pre-wired models (Cable length: 2 m)
Indicator	Operation indicator (Orange), I mode indicator (Orange), Digital display
Weight (packed state)	Approx. 100 g
Material (case)	PBT
Material (cover)	Polycarbonate
Mounting	DIN rail or the mounting bracket type E39-L143 (sold separately)
Accessories	Instruction manual