บริษัท ทริปเปิ้ล อี เทรดดิ้ง จำกัด

Fluke 3312 PR

฿48300.00

Fluke 3312 PR

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

รายละเอียดสินค้า Fluke 3312 PR

Specifications
Electrical Characteristics
Measurement Range	100 to 5000 A (with a crest factor ≤3)
Frequency Range	40 Hz to 5 kHz
Accuracy (@ 25°C)	±1% of reading
Linearity (10 % to 100 % of range)	±0.2% of reading per °C
Temperature Coefficient	±0.05% of reading per °C
Position Sensitivity (w/ cable >25 mm from coupling)	±2% of reading
External Field (w/ cable >200 mm from head)	±1% of reading
Working Voltage (see Safety Standards)	1000V ac rms or dc
General Characteristics
Probe and Cable Material	Alcryn 2070NC, reinforced insulation, UL94 V0, Color: RED
Probe Cable Length	48 in. (610 mm)
Probe Cable Diameter	0.3 in. (8 mm)
Transducer Bend Radius (min)	1.5 in. (38.1 mm)
Output Cable	2 core screened, double insulated, 3 meters long
Output Connector	LEMO 6 pin male connector
Operating Temperature Range	-4 to +158°F (-20 to +70°C) (the temperature of the conductor under test shall not exceed 176°F /80°C)
Storage Temperature Range	-40 to 176°F (-40 to +80°C)
Operating Humidity	15% to 85% (non condensing)
Altitude	max 6562 ft. (2000 m)
Degree of ingress protection	IP40 (IEC 60529)
Safety Standards
EN/IEC 61010-1:2001 EN/IEC 61010-031:2002+A1:2008 EN/IEC 61010-2-032:2002 Pollution Degree 2 Use of the Probe on uninsulated conductors is limited to 1000 V under CAT III installations and 600 V under CAT IV installations ac rms or dc and frequencies below 1 kHz. Note that the safety rating for the output to ground is limited to 30 V ac rms or dc by the connector specified.