บริษัท ทริปเปิ้ล อี เทรดดิ้ง จำกัด

Fluke 435 Series II Basic

฿265900.00
Fluke 435 Series II Basic
เหลือ 0 ชิ้น
ซื้อเลย
หยิบลงตะกร้า
  • หมวดหมู่ : Power Analyzers/Quality
  • รหัสสินค้า : 012163

รายละเอียดสินค้า Fluke 435 Series II Basic

Series II Three-Phase Power Quality and Energy Analyzer

  • Energy loss calculator
  • Power inverter efficiency
  • Power Wave data capture
  • Wave form capture
  • Automatic Transient Mode
  • Fully Class-A compliant
  • Mains signaling
  • Troubleshoot real-time
  • Highest safety rating in the industry
  • Measure all three phases and neutral
  • Automatic Trending
  • System-Monitor
  • Logger function
  • View graphs and generate reports
  • Seven hours operating time per charge on Li-ion battery pack
Fluke 435-II Measurement Modes
Scope 4 voltage waveforms, 4 current waveforms, Vrms, Vfund. Arms, A fund, V @ cursor, A @ cursor, phase angles
Volts/amps/hertz Vrms phase to phase, Vrms phase to neutral, Vpeak, V Crest Factor, Arms Apeak, A Crest Factor, Hz
Dips and swells Apeak, A Crest Factor, Hz Dips and swells
Harmonics dc, 1 to 50, up to 9th harmonic for 400 Hz Harmonics Volts, THD, Harmonic Amps, K factor Amps, Harmonic Watts, THd Watts, K factor Watts, Interharmonic Volts, Interharmonic Amps, Vrms, Arms (relative to fundamental or to total rms)
Power and energy Vrms, Arms, Wfull, Wfund., VAfull, VAfund., VAharmonics, VAunbalance, var, PF, DPF, CosQ, Efficiency factor, Wforward, Wreverse
Energy loss calculator Wfund, VAharmonics, VAunbalance, var, A, Loss Active, Loss Reactive, Loss Harmonics, Loss Unbalance, Loss Neutral, Loss Cost (based upon user defined cost / kWh)
Inverter efficiency(requires optional dc current clamp) Wfull, Wfund, Wdc, Efficiency, Vdc, Adc, Vrms, Arms, Hz
Unbalance Vneg%, Vzero%, Aneg%, Azero%, Vfund, Afund, V phase angles, A phase angles
Inrush Inrush current, Inrush duration, Arms½, Vrms½
Monitor Vrms, Arms, harmonic Volts, THD Volts, PLT, Vrms½, Arms½, Hz, dips, swells, interruptions, rapid voltage changes, unbalance and mains signalling. All parameters are measured simultaneously in accordance with EN50160. Flagging is applied according to IEC61000-4-30 to indicate unreliable readings due to dips or swells
Flicker Pst(1min), Pst, Plt, Pinst, Vrms ½, Arms ½, Hz
Transients Transient waveforms 4x Voltage 4x Amps, triggers: Vrms ½, Arms ½, Pinst
Mains Signaling Relative signaling voltage and absolute signaling voltage averaged over three seconds for up to two selectable signaling frequencies
Power Wave Vrms½, Arms½ W, Hz and scope waveforms for voltage amps and watts
Logger Custom selection of up to 150 PQ parameters measured simultaneously on 4 phases
 

สินค้าที่เกี่ยวข้อง Fluke 435 Series II Basic

สถิติของเว็บไซต์

เปิดเว็บเมื่อ : 15/10/2552
ปรับปรุงเว็บเมื่อ : 04/11/2569
ผู้ชมทั้งหมด :
สินค้าทั้งหมด : 520764

หมวดหมู่