|
Model |
AP-51ZA |
|||
|
Type |
Negative pressure type*1, Zero shift type |
|||
|
Rated pressure |
0 to -101.3 kPa |
|||
|
Type of pressure |
Gauge pressure, gases and liquids compatible with SUS630 and SUS304 |
|||
|
Display power |
4-digit 7-segment LED (character height: 8 mm), display cycle: 5 times/sec. |
|||
|
Display resolution |
0.1kPa |
|||
|
Detectable pressure range |
-15% to +120% of F.S. from the 0-point adjustment position |
|||
|
Repeatability |
±0.5% of F.S. ± 1 digit or less |
|||
|
Response |
5 ms |
|||
|
I/O |
Control outputs |
Maximum NPN open-collector output: 100 mA (40 V or less), residual voltage: 1 V or less, N.O./N.C. switchable |
||
|
Analogue output |
― |
|||
|
Zero-shift input |
Input time: 20 ms or more |
|||
|
Control output hysteresis |
Variable (when hysteresis mode is selected), 0.5% of F.S. in standard mode |
|||
|
Rating |
Power voltage |
12 to 24 VDC ±10% |
||
|
Current consumption |
75 mA max. |
|||
|
Environmental resistance |
Enclosure rating |
IP67 |
||
|
Operating ambient temperature |
-10 to +50℃ |
|||
|
Operating ambient humidity |
35 to 85%RH (no freezing and no condensation) |
|||
|
Vibration |
10 to 55 Hz Double amplitude 1.5 mm in the X, Y, Z |
|||
|
Shock resistance |
100 m/s2, 3 times in each of the X, Y, and Z directions |
|||
|
Pressure resistance |
500 kPa |
|||
|
Material |
Liquid contact section: SUS630 and SUS304, case: PBT die-cast zinc |
|||
|
Weight |
approx 185g |
|||
|
*1 The negative pressure type displays positive values when negative pressure is detected and displays negative values when positive pressure is detected. (Example: When -50.0 kPa is detected, 50.0 kPa is displayed.) |
||||


This website uses cookies (Learn more) and has a privacy policy (Learn more).



