บริษัท ทริปเปิ้ล อี เทรดดิ้ง จำกัด

Leuze MLC520R20-1500

฿122000.00
Leuze MLC520R20-1500
เหลือ 0 ชิ้น
ซื้อเลย
หยิบลงตะกร้า
  • หมวดหมู่ : Leuze
  • รหัสสินค้า : 025501

รายละเอียดสินค้า Leuze MLC520R20-1500

  • Basic data
    • SeriesMLC 500
    • Device typeReceiver
    • Contains2x BT-NC sliding block
    • ApplicationHand protection
  • Functions
    • Function packageStandard
    • FunctionsStart/restart interlock (RES), Contactor monitoring (EDM), Transmission channel changeover
  • Characteristic parameters
    • Type4, IEC/EN 61496
    • SIL3, IEC 61508
    • SILCL3, IEC/EN 62061
    • Performance Level (PL)e, EN ISO 13849-1
    • PFHD7.73E-09 per hour
    • Mission time20 years, EN ISO 13849-1
    • Category4, EN ISO 13849
  • Protective field data
    • Resolution20 mm
    • Protective field height1,500 mm
  • Optical data
    • SynchronizationOptical between transmitter and receiver
  • Electrical data
    • Protective circuitShort circuit protected, Overvoltage protection
    • Performance data
      • Supply voltage24 V, DC, -20 ... 20 %
      • Current consumption, max.150 mA
      • Fuse2 A semi time-lag
    • Inputs
      • Number of digital switching inputs3 Piece(s)
      • Switching inputs
        • TypeDigital switching input
        • Switching voltage high, min.18 V
        • Switching voltage low, max.2.5 V
        • Switching voltage, typ.22.5 V
        • Voltage typeDC
      • Digital switching input 1
        • FunctionControl input selection, operating mode 1 or 4
      • Digital switching input 2
        • FunctionControl input selection, operating mode 2 or 5
      • Digital switching input 3
        • FunctionControl input selection, operating mode 3 or 6
    • Outputs
      • Number of safety-related switching outputs (OSSDs)2 Piece(s)
      • Safety-related switching outputs
        • TypeSafety-related switching output OSSD
        • Switching voltage high, min.18 V
        • Switching voltage low, max.2.5 V
        • Switching voltage, typ.22.5 V
        • Voltage typeDC
        • Current load, max.380 mA
        • Load inductivity2,000 µH
        • Load capacity0.3 µF
        • Residual current, max.0.2 mA
        • Residual current, typ.0.002 mA
        • Voltage drop1.5 V
      • Safety-related switching output 1
        • Switching principle+24 V switching
        • Switching elementTransistor, PNP
      • Safety-related switching output 2
        • Switching principle+24 V switching
        • Switching elementTransistor, PNP
  • Timing
    • Response time26 ms
    • Restart delay time100 ms
  • Connection
    • Number of connections1 Piece(s)
    • Connection 1
      • Type of connectionConnector
      • FunctionMachine interface
      • Thread sizeM12
      • TypeMale
      • MaterialMetal
      • No. of pins8 -pin
    • Cable properties
      • Permissible conductor cross section, typ.0.25 mm²
      • Length of connection cable, max.100 m
      • Permissible cable resistance to load, max.200 Ω
  • Mechanical data
    • Dimension (W x H x L)30.7 mm x 1,566 mm x 40.3 mm
    • Housing materialMetal, Aluminum
    • Lens cover materialPlastic / PMMA
    • Material of end capsDiecast zinc
    • Net weight1,650 g
    • Housing colorYellow, RAL 1021
    • Type of fasteningMounting bracket, Swivel mount, Groove mounting, Mounting on Device Column
  • Operation and display
    • Type of displayLED, 7‑segment display
    • Number of LEDs2 Piece(s)
  • Environmental data
    • Ambient temperature, operation0 ... 55 °C
    • Ambient temperature, storage-25 ... 70 °C
    • Relative humidity (non-condensing)0 ... 95 %
  • Ex specification
    • Ex device category3D, 3G
  • Ex-Spezifikation
    • Ex-Zone2, 22
  • Ex specification
    • Ex device groupII
    • Permissible surface temperatureT<85° (T4) °C
    • Ignition protection type“nA” non-sparking, “tc” protection through housing
  • Certifications
    • Degree of protectionIP 65
    • Protection classIII
    • Certificationsc TÜV NRTL US, TÜV Süd
    • Vibration resistance50 m/s²
    • Test procedure for oscillation in accordance with standardIEC/EN 60068-2-6
    • Shock resistance100 m/s²
    • Test procedure for shock in accordance with standardIEC/EN 60068-2-6
    • US patentsUS 6,418,546 B
  • Classification
    • Customs tariff number85365019
    • eCl@ss 8.027272704
    • eCl@ss 9.027272704
    • ETIM 5.0EC002549

สถิติของเว็บไซต์

เปิดเว็บเมื่อ : 15/10/2552
ปรับปรุงเว็บเมื่อ : 04/11/2569
ผู้ชมทั้งหมด :
สินค้าทั้งหมด : 520764

หมวดหมู่