- หน้าแรก
- สินค้า
- FLUKE Measurement
- FLUKE EASYSPLICER FIBER OPTIC
FLUKE EASYSPLICER FIBER OPTIC
- หมวดหมู่ : FLUKE Measurement
- รหัสสินค้า : 040449
รายละเอียดสินค้า FLUKE EASYSPLICER FIBER OPTIC
FLUKE EASYSPLICER FIBER OPTIC ราคา 85000 บาท
-
Fusion splicing made easy and affordable with the EasySplicer
-
For both Singlemode and Multimode fibres
-
Splicing time of less then 7 seconds
-
Loss estimation.
-
Pull test of performed splices
-
Built in oven.
-
Easy to use and to carry along
-
Perfect for the FTTH installer
The EasySplicer is a swedish made Fusion Splicer, designed for working
daily with fiber optic installations.
It´s small and handy to bring along to any kind of work. The
construction is made very rugged and even if splicing should take
place under good conditions (indoors) it is still designed to be
used out in the field.
The design of the EasySplicer differs a bit from other Fusion Splicers
as it is made with focus on the installer/user. Many of the Splicers
on the market are, even if very competent, difficult to use and
require a lot education before they can be operated.
The EasySplicer is very easy to learn how to use. It doesn´t take
more than an hour for anyone to learn how to use the Splicer
and start working with it.
The EasySplicer operates with three buttons only and mostly the user
only have to use the main button to perform the splicing.
Still, the precision of the unit is extremely high. It makes typical
splicing with a loss of 0,03 dB (Singlemode). After splicing it pull tests
the splice and makes a loss estimation of the splice were it also tells if
something is wrong. Such information is also provided before splicing
(like; Bad fiber and Dirty fiber ).
The battery-pack inside the unit is small but very powerful. The
unit can perform some 60 splices before it needs to be recharged.
Extra battery-packs can also be sold separately (and easily be
exchanged in the unit by the installer).
The EasySplicer is constantly calibrating itself for environment changes
(like; moisture). This can also be done manually, for ex. when
starting the work of the day. Calibration is very easily performed
(within seconds) and makes sure that the splicing is made perfect.
The EasySplicer is using the V-grove method for splicing (same as
Ribbon-splicers are using) which has made it possible to keep the
size small of the unit. It also makes this unit extremely costeffective.
The EasySplicer is one of the most inexpensive splicers on
the market, yet with a performance of 4-5 times more expensive
units.
รีวิว (2)
เพิ่มรีวิว
