บริษัท ทริปเปิ้ล อี เทรดดิ้ง จำกัด

Tektronix TPS2012

฿154154.00

Oscilloscope; Digital Storage, 100MHz, 1 GS/S, 2 Isolated Channels, Color Display, Battery Powered, Certificate of Traceable Calibration Standard

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : Scope Meters \quot;Oscilloscopes\quot;
รหัสสินค้า : 006906

รายละเอียดสินค้า Tektronix TPS2012

Specifications

Electrical
Isolated Channels	2
Bandwidth¹ (MHz)	100
Sample Rate (GS/s) Per Channel	1.0
Record Length	2.5 K points
Display (1/4 VGA LCD)	Color
Battery Operation	Capacity for two hot-swappable battery packs. One standard battery pack offers 4 hours of battery operation. Optional second battery pack extends battery operation to 8 hours. Continuous battery operation is possible by hot-swapping charged batteries.
Automatic Measurements	11
Isolated External Trigger Input (Impedance Isolated)	Yes
Vertical Resolution	8-bits (normal or with averaging)
Vertical Sensitivity	2 mV to 5 V/div on all models with calibrated fine adjustment
DC Vertical Accuracy	±3%
Vertical Zoom	Vertically expand or compress a live or stopped waveform
Max Input Voltage (1 MΩ)²	300 VRMS CAT II at BNC signal to BNC shell, 1000 VRMS CAT II at probe tip to earth ground with optional P5120 passive, high-voltage probe
Float Voltage²	600 VRMS CAT II or 300 VRMS CAT III BNC shell to earth ground, 1200 VRMS CAT II between any two channel commons with each of the channel commons not being more than ±600 VRMS from earth ground
Position Range	2 mV to 200 mV/div ±2 V; >200 mV to 5 V/div ±50 V
Bandwidth Limit	20 MHz
Linear Dynamic Range	±5 div
Time Base Range	5 ns to 50 s/div
Time Base Accuracy	50 ppm
Input Impedance	1 M±2 % in parallel with 20 pF
Input Coupling	AC, DC, GND
Horizontal Zoom	Horizontally expand or compress a live or stopped waveform
FFT	Standard
RS-232, Centronics-Parallel Ports	Standard
PC Connectivity	Standard
Integrated CompactFlash Mass Storage	Standard
Power Measurements	Optional package that offers instantaneous power waveform analysis, waveform analysis, harmonics analysis, switching loss,
phase angles, dv/dt and di/dt cursors	phase angles, dv/dt and di/dt cursors
Signal Type
Square wave	Single-cycle, Multi-cycle, Rising or Falling Edge
Sine Wave	Single-cycle, Multi-cycle, FFT Spectrum
Video (NTSC, PAL, SECAM)	Video (NTSC, PAL, SECAM) Field: All, Odd, or Even Line: All or Selectable Line Number
Nonvolatile Storage
Nonvolatile Storage	Standard (with CompactFlash® Mass Storage)
Reference Waveform Display	Two 2500 point reference waveforms
Waveform Storage	96 or more reference waveforms per 8 MB
Setups	4000 or more front panel setups per 8 MB
Screen Images	128 or more screen images per 8 MB (the number of images depends on file format selected)
Save All	12 or more Save All operations per 8 MB. A single Save All operation creates 2 to 9 files (setup, image, plus one file for each displayed waveform).
Display Characteristics
Display	1/4 VGA, passive color LCD with color on black background with adjustable multi-level contrast and brightness controls.
Interpolation	Sin(x)/x.
Display Types	Dots, vectors.
Persistence	Off, 1 sec, 2 sec, 5 sec, infinite.
Format	YT and XY.
Overvoltage Categories
CAT III	Distribution-level mains, fixed installation
CAT II	Local-level mains, appliances, portable equipment
CAT I	Signal levels in special equipment or parts of equipment, telecommunications, electronics
Physical Characteristics
Width	336.0mm, 13.24in
Height	161.0mm, 6.33in
Depth	130.0mm, 5.10in
Weight	Instrument only: 2.7kg, 6.0lb \| with 1 battery: 3.2kg, 7.0lb \| with 2 batteries: 3.7kg, 8.0lb