TRIPLE E TRADING CO., LTD.
Tektronix TDS3012C
฿195604.50
OSCILLOSCOPE; DPO, 100MHZ, 1.25 GS/S, 2 CHANNEL, COLOR DISPLAY, CERTIFICATE OF TRACEABLE CALIBRATION STANDARD
เหลือ 99 ชิ้น
ซื้อเลย
หยิบลงตะกร้า
  • หมวดหมู่ : Scope Meters \quot;Oscilloscopes\quot;
  • รหัสสินค้า : 006897

รายละเอียดสินค้า Tektronix TDS3012C

 

Specifications
General
Bandwidth 100 MHz
Channels 2
Sample rate on each channel 1.25 GS/s
Maximum record length 10 K points on all models
Vertical resolution 9 Bits on all models
Vertical sensitivity (/div) 1 mV - 10 V on all models
Vertical accuracy ±2% on all models*1

*1Derated at 0.025%/°C for temperatures above +30°C and below +18°C.
Max input voltage (1 Megaohm) 150 VRMS CAT I on all models (300 V CAT II with standard 10X probe)
Position range ± 5 div on all models
BW limit 20 MHz
Input coupling AC, DC, GND on all models
Input impedance selections 1 Megaohm in parallel with 13 pF or 50 Ohm
Time base
Range (/div) 4 ns - 10 s/div
Accuracy 20 ppm
Display monitor Color LCD
Acquisition Modes
DPO Captures and displays complex waveforms, random events and subtle patterns in actual signal behavior. DPOs are able to provide 3 dimensions of signal information in real time: Amplitude, time and the distribution of amplitude over time.
Peak Detect High frequency and random glitch capture. Captures glitches as narrow as 1 ns.
WaveAlert Monitors the incoming signals on all channels and alerts the user to any waveform that deviates from the normal waveform being acquired.
Sample Sample data only.
Envelope Max/min values acquired over one or more acquisitions.
Average Waveform data from 2 to 512 (selectable) acquisitions is averaged.
Single Sequence Use the Single Sequence button to capture a single triggered acquisition sequence at a time.
Trigger System
Main Trigger Modes Auto (supports Roll Mode for 40 ms/div and slower), Normal.
B Trigger Trigger after time or events.
Trigger After Time Range 13.2 ns to 50 s.
Trigger After Events Range 1 to 9,999,999 events.
External Trigger Input >1 Megaohm in parallel with 17 pF; Max input voltage is 150 VRMS.
Trigger Types
Edge Conventional level-driven trigger. Positive or negative slope on any channel. Coupling selections: DC, noise reject, HF reject, LF reject.
Video Trigger on all lines or individual line, odd/even or all fields or analog HDTV formats (1080i, 1080p, 720p, 480p). See optional TDS3VID and TDS3SDI application modules for extended video triggering and measurement features.
Logic (requires TDS3TRG) PATTERN: Specifies AND, OR, NAND, NOR when true or false for a specific time.
STATE: Any logic state. Triggerable on rising or falling edge of a clock. Logic triggers can be used on combinations of 2 inputs (not 4).
Pulse (requires TDS3TRG) WIDTH (or GLITCH): Trigger on pulse width less than, greater than, equal to or not equal to a selectable time limit ranging from 39.6 ns to 50 s.
RUNT: Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
SLEW RATE: Trigger on pulse edge rates that are either faster or slower than a set rate. Edges can be rising, falling or either.
Comm (requires TDS3TMT) Provides isolated pulse triggering required to perform DS1/DS3 telecommunications mask testing per ANSI T1.102 standard.
Alternate Sequentially uses each active channel as a trigger source.
Measurement System
Automatic Waveform Measurements Period, Frequency, +Width, -Width, Rise Time, Fall Time, +Duty Cycle, -Duty Cycle, +Overshoot, -Overshoot, High, Low, Max, Min, P-P, Amplitude, Mean, Cycle Mean, RMS, Cycle RMS, Burst Width, Delay, Phase, Area*1, Cycle Area*1.
Display any four measurements from any combination of waveforms.
*1Requires TDS3AAM module.
Thresholds Settable in percentage or voltage.
Gating Measurements can be gated using the screen or vertical cursors.
Waveform Processing
Deskew Channel-to-channel deskew ±10 ns may be manually entered for better timing measurements and more accurate math waveforms.
Arithmetic Operators Add, subtract, multiply, divide.
Autoset Single-button, automatic setup on selected input signal for vertical, horizontal and trigger systems.
Display Characteristics
Waveform Style Dots, vectors and variable persistence.
Graticules Full, grid, cross-hair, frame, NTSC, PAL, SECAM, vectorscope 100% and 75% color bars (with optional TDS3VID and TDS3SDI video application modules).
Format YT, XY and Gated XYZ (XY with Z-axis blanking available on TDS30X4C only).
I/O Interface
Hardcopy Port (standard) Centronics-type parallel.
TDS3GV Communications Module GPIB (IEEE -488.2) programmability: Full talk/listen modes; Control of all modes, settings and measurements.
VGA: Monitor output for direct display on large VGA-equipped monitors. DB-15 female connector, 31.6 kHz sync rate, EIA RS-343A compliant.
RS-232-C interface programmability: Full talk/listen modes; Control of all modes, settings and measurements. Baud Rate up to 38,400. DB-9 male connector.
Programmer manual: 071-0381-01.
Hard Copy Capability
Graphics File Formats Interleaf (.img), TIF, PCX (PC Paintbrush), BMP (Microsoft Windows) and Encapsulated Postscript (EPS).
Printer Formats Bubblejet, DPU-3445, Thinkjet, Deskjet, Laserjet, Epson (9- and 24-Pin).
Environmental & Safety
Temperature +5 to +50°C (operating), -20 to +60°C (nonoperating).
Humidity 20% to 80% RH below 32°C, derate to 30% RH at 45°C (operating), 5% to 90% RH below 41°C, derate to 30% RH at 60°C (nonoperating).
Altitude to 3,000 m (operating), 15,000 m (nonoperating).
Electromagnetic Compatibility Meets or exceeds EN55011 Class A radiated and conducted emissions; EN50082-1; FCC 47 CFR, Part 15, Subpart B, Class A; Australian EMC framework; Russian GOST EMC regulations.
Safety UL3111-1, CSA1010.1, EN61010-1, IEC61010-1.
Physical Characteristics
Dimensions mm in.
Width 375.0 14.8
Height 176.0 6.9
Depth 149.0 5.9
Weight kg lbs.
Instrument only 3.2 7.0
w/battery 5.2 11.5
Instrument Shipping Package
Dimensions mm in.
Width 502.0 19.8
Height 375.0 14.8
Depth 369.0 14.5
Rackmount
Dimensions mm in.
Width 484.0 19.0
Height 178.0 7.0
Depth 152.0 6.0